Ridgid 29993 Deburring Tool Review
The Ridgid 29993 Deburring Tool is a hand tool designed to clean up the inside and outside edges of cut copper, plastic, and other tubing so fittings seat properly and solder or solvent cement can do its job. It sits in the plumbing and bathroom category because deburring is one of those small prep steps that separates a leak free joint from a callback, and this model is built around Ridgid's reputation in the trades rather than the bargain bin.
Quick answer
This is right for DIYers and working plumbers who cut tubing regularly and want a dedicated, durable deburring tool instead of improvising with a knife or sandpaper.
Why trust ToolBuyerHub
- Cross-checked manufacturer-published specifications before writing any recommendation
- Verified US market availability and configuration for every model discussed
- Owner-feedback themes are summarized as feedback, never presented as our own hands-on testing
- No invented star ratings; see the visible Research Score criteria on this page
- Flagged water-isolation and pressure-safety steps wherever a tool touches pressurized lines
- Plumbing tool recommendations are checked against manufacturer specifications and recurring owner feedback themes, with attention to whether a tool actually fits common copper and plastic tubing sizes.
Research updated September 2026.
Ridgid 29993 Deburring Tool
ReviewedPros
- Ridgid brand backing means parts and replacement blades are easier to source than no name deburring tools
- Handheld design works in tight spaces where a bulky reaming tool will not fit
- Cuts prep time on copper and plastic tubing compared with filing or sanding each cut end
Cons
- Blades wear out with heavy use and replacements add ongoing cost
- It is a single purpose tool, so it does not replace a full reaming or chamfering setup for large diameter pipe
The Ridgid 29993 is a compact handheld deburring tool aimed at cleaning cut tubing ends before assembly. It reflects Ridgid's trade focused design approach, with a body meant to survive job site use rather than occasional drawer duty. Based on manufacturer specifications, it is intended for deburring copper and plastic tubing as part of standard plumbing prep.
Real-World Notes
Owner feedback themes around Ridgid deburring tools tend to focus on how much faster joint prep goes once you stop reaching for a file, and on the tool holding up to repeated use in a plumbing bag. The common complaint is blade life, since the cutting edge dulls after enough copper and plastic pipe ends and replacements are an added expense. Users who only deburr a few cuts a year often find a simpler or cheaper method good enough, while anyone doing regular repipes or fixture installs tends to keep one in the bag.
Alternatives Worth a Look
- Ridgid 29963 Deburring Tool
- Superior Tool 05265 Deburring Tool
Who Should Consider Something Else
Skip this if you only cut tubing once or twice a year, if you work mostly with large diameter pipe that needs a full reamer, or if you want a single tool that also chamfers and reams in one pass. A basic deburring bit or a reaming attachment on your cutter may cover your needs for less money.
FAQs
What is the Ridgid 29993 used for?
It is a handheld deburring tool for removing the sharp raised edge left on copper and plastic tubing after a cut, so fittings seat cleanly and joints seal properly.
Does it work on both copper and plastic pipe?
Based on manufacturer specifications it is intended for deburring tubing including copper and common plastic pipe, which covers most residential plumbing prep work.
Do the blades need replacing?
Yes, the cutting edge dulls with use, and replacement blades are a normal ongoing cost for anyone doing regular plumbing work.
Is this a reamer or a deburring tool?
It is a deburring tool. It cleans the cut edge, but it is not a substitute for a full reamer on large diameter or heavy wall pipe.
Is it worth it for a homeowner?
If you do your own plumbing repairs and cut tubing more than occasionally, yes. For one off jobs, a simple deburring bit or a few passes with a file may be enough.
Our verdict
The Ridgid 29993 is a solid, trade oriented deburring tool that earns its place in a plumbing bag for anyone who preps tubing regularly. The main tradeoffs are blade replacement cost and its single purpose design, which matter little if you deburr often and a lot if you do not. Buy it if tubing prep is a routine part of your work, and look at a cheaper bit or a reaming attachment if it is not.