Best Metabo Table Saw of 2026: The C10RJS, Explained
Searching for a "Metabo table saw" turns up two different companies. Metabo HPT is the North American brand formerly sold as Hitachi Power Tools, and in the US its table saw line comes down to one machine: the 10-inch C10RJS jobsite saw. Metabo, the German parent brand, sells the TS-series table saws, but those run on 230 volts and are aimed at the UK and Europe. This guide separates the two so you buy the right saw the first time.
Quick answer
If you are buying in the US, the Metabo HPT C10RJS 10-inch jobsite table saw is the answer, because it is effectively the only table saw Metabo HPT sells here. It runs a 15-amp motor at 4,500 RPM, rips 35 inches to the right of the blade, and folds down onto a rolling stand. Metabo's German TS 254 and TS 216 are real table saws, but they are 230-volt machines built for the European market.
Why trust ToolBuyerHub
- Checked accessory compatibility and guarding before ranking any cutting or grinding tool
- Battery & ecosystem compared
- Aggregated owner reviews
- Build quality & warranty checked
- Brand reliability
- No fake hands-on claims
Research updated August 2026.
Metabo HPT C10RJS 10-Inch Jobsite Table Saw
The one Metabo HPT table saw sold in North America, and a genuinely good jobsite saw.
| Product | Best For | Key Spec | Market | Rating |
|---|---|---|---|---|
| Metabo HPT C10RJS | US buyers / jobsite | 15 Amp, 10", 35" rip | North America, 120V | 4.6/5 |
| Metabo TS 254 / TS 254 M | Workshop use | 2,000W, 254mm (10") | UK & Europe, 230V | 4.4/5 |
| Metabo TS 216 | Portability / site work | 1,500W, 216mm (8.5") | UK & Europe, 230V | 4.2/5 |
Metabo HPT C10RJS 10-Inch Jobsite Table Saw
Best Overall (and the only US option)Pros
- 35-inch rip capacity handles a full sheet of plywood ripped to width
- Telescoping rack-and-pinion fence rails stay parallel to the blade
- Soft start and electric brake, plus a fold-and-roll stand
Cons
- Aluminum top, so it is not a cast-iron cabinet saw substitute
- Around 96 lbs with the stand, which is heavy to lift into a truck bed alone
- 2-1/2 inch dust port only, so dust collection is jobsite-grade
The C10RJS is the current version of the saw that used to wear a Hitachi badge as the C10RJ, and the design has aged well. The 15-amp motor spins the 10-inch blade at 4,500 RPM and cuts 3-1/8 inches deep at 90 degrees and 2-1/4 inches at 45 degrees, which covers 4x4 material in a single pass at square and everything you normally see in framing and trim work.
The headline number is the 35-inch rip capacity to the right of the blade, reached by pulling out the telescoping rails. That is more than most jobsite saws offer and it is the reason contractors keep buying this one. The fence rides on a rack-and-pinion arrangement so it tracks square when you slide it, rather than needing a tap and a re-measure. Soft start keeps the saw from lurching when you hit the switch and the electric brake stops the blade quickly at the end of a cut.
The trade-offs are the ones every portable saw makes. The table is aluminum rather than cast iron, so it is lighter but less dead-flat under load than a stationary saw, and the 2-1/2 inch dust port sends more dust into the air than a shop setup with a 4-inch line would. At roughly 96 pounds with the stand attached, it rolls easily but is awkward to lift solo.
Metabo TS 254 / TS 254 M Table Saw
Best Workshop Saw (UK & Europe, 230V)Pros
- 2,000-watt motor with real depth of cut for thick stock
- Cast-alloy table and a solid parallel guide
- Built as a semi-stationary shop saw, not a light site saw
Cons
- 230-volt European machine, so it is not a plug-and-play US buy
- Rarely stocked on Amazon.com
- Heavier than the TS 216 if you do need to move it
This is the saw most people picture when they think of a German Metabo table saw. The TS 254 family runs a 2,000-watt motor on a 254mm blade, which is the metric equivalent of a 10-inch blade, and cuts around 87mm deep at 90 degrees. The TS 254 M is the beefier variant in the line, with a larger table and more support around the blade.
It is a workshop saw rather than a site saw. The table is a cast alloy rather than pressed steel, the parallel guide clamps at both ends, and the whole machine is set up to sit in one place and be fed material. For ripping cabinet stock and repeat-cutting sheet goods in a small shop, it is a sensible size.
The catch for US readers is straightforward: this is a 230-volt, 50Hz machine sold through European channels. Running one in North America means a transformer or a dedicated 240-volt circuit plus a plug swap, and warranty support is not the same as buying a Metabo HPT product locally. If you are in the UK or Europe, it is the Metabo table saw to look at. If you are in the US, the C10RJS above is the practical choice.
Metabo TS 216 Table Saw
Most Portable Metabo Table SawPros
- Light enough for one person to carry and set up
- Compact footprint suits a garage or small van
- Simple, serviceable design
Cons
- 216mm blade means only 60mm of cut depth, so no 4x4 in one pass
- Smaller table gives less support for sheet goods
- 230-volt European model, same import caveat as the TS 254
The TS 216 is frequently mislabelled online as a 10-inch cast-iron workshop saw. It is not. It takes a 216mm blade, which is roughly 8.5 inches, runs a 1,500-watt motor and weighs about 52 pounds. That combination makes it a compact portable saw, not a stationary one.
What you get for the smaller size is a saw one person can lift onto a bench or into a van. Depth of cut is 60mm at 90 degrees and 45mm at 45 degrees, which covers sheet material, batten, decking boards and most trim, but stops short of the 3-inch-plus depth a full 254mm or 10-inch saw gives you. Fence and table are sized to match, so it is best fed with a helper or a roller stand once panels get large.
Choose it over the TS 254 if the saw has to move regularly. If it lives in one place, the extra power and depth of the larger saw is worth the extra weight. As with the TS 254, this is a 230-volt machine sold mainly in the UK and Europe.
Metabo HPT Saws People Mistake for Table Saws
A lot of "Metabo table saw" searches end up on miter saws, because Metabo HPT's best known saws are miter saws and the model numbers look similar. These are all real, well regarded tools, but none of them is a table saw and none of them will rip a sheet of plywood.
Metabo HPT C10FCG2: a 15-amp, 10-inch single-bevel compound miter saw weighing around 24 pounds. It is one of the cheapest name-brand miter saws you can buy and it is genuinely light, but it is a crosscut tool for trim and 2x stock. If a listing calls a C10FCG2 a "jobsite table saw", the listing is wrong.
Metabo HPT C3610DRA: a 36V MultiVolt cordless 10-inch sliding dual-bevel miter saw, roughly 57 pounds, with a laser marker. It can also run off mains power with the MultiVolt AC adapter. Again, a miter saw, and a cordless one rather than a 15-amp corded saw.
Metabo HPT C12RSH2S: the 15-amp, 12-inch corded sliding dual-bevel compound miter saw. This is the model people usually mean when they describe "a 15-amp 12-inch Metabo slider", and it is often confused with the cordless C3610DRA.
If you need both a table saw and a miter saw from the same brand, the pairing is the C10RJS for ripping and one of the miter saws above for crosscutting. They do different jobs and neither replaces the other.
What to Check Before Buying a Metabo Table Saw
Start with the electrical supply, because that is the decision that rules out half the options. Metabo HPT tools sold in North America run on 120-volt household power. Metabo's German TS-series table saws are 230-volt machines built for European mains. Importing one is possible but it means a transformer or a dedicated circuit, a plug change, and no local warranty cover.
Then look at rip capacity, which is the distance from the blade to the fence at full extension. The C10RJS gives 35 inches to the right of the blade, which is enough to rip a 4-foot sheet down to standard cabinet widths without repositioning. Anything under about 25 inches starts forcing awkward workarounds on sheet goods.
Depth of cut is the spec that catches people out with the TS 216. Blade diameter sets it: a 254mm or 10-inch blade gives you roughly 3 inches at 90 degrees, while the 216mm blade on the TS 216 gives 60mm, about 2-3/8 inches. If you cut 4x4 posts, you need the bigger blade.
Finally, weight and the stand. The C10RJS is about 96 pounds with its fold-and-roll stand attached, which rolls fine on a flat site but is a two-person lift into a truck. A lighter saw like the TS 216 is easier to move but gives up capacity and table support in exchange.
Mistakes to Avoid When Choosing a Metabo Table Saw
The most common mistake is assuming Metabo and Metabo HPT are the same company. They are not. Metabo HPT is the North American brand for what used to be Hitachi Power Tools, and Metabo is the German brand owned by the same parent group, Koki Holdings. Model numbers, voltages and dealer networks are all different, so a spec sheet for one tells you nothing about the other.
The second is buying on a model number without checking the tool type. C10FCG2, C10RJS and C3610DRA all start the same way and all contain "10", but only the C10RJS is a table saw.
The third is expecting shop-grade dust collection from a jobsite saw. The C10RJS has a 2-1/2 inch port that suits a shop vacuum, not a 4-inch dust extractor line. If you work indoors, plan on a vacuum with a fine filter and a bag, and expect to sweep.
Last, do not expect a portable saw to behave like a cast-iron one. Aluminum tops save a lot of weight but they are more prone to flex and to dings, so check flatness with a straightedge when the saw arrives and set the blade parallel to the miter slot before you trust the fence.
FAQs
Is Metabo HPT the same as Metabo?
No. Metabo HPT is the North American brand name for tools formerly sold as Hitachi Power Tools. Metabo is the German brand. Both sit under the same parent group, Koki Holdings, but they are separate product lines with different model numbers and different mains voltages.
Does Metabo HPT make a table saw?
Yes, one: the C10RJS 10-inch jobsite table saw, previously sold with a Hitachi badge as the C10RJ. Everything else in the Metabo HPT saw range is a miter saw, circular saw or reciprocating saw.
What is the rip capacity of the Metabo HPT C10RJS?
35 inches to the right of the blade with the telescoping rails extended, which is enough to rip a 4-foot sheet of plywood down to cabinet widths without flipping the panel.
What size blade does the Metabo TS 216 take?
216mm, which is about 8.5 inches, with a 30mm bore. It is not a 10-inch saw. Depth of cut is 60mm at 90 degrees and 45mm at 45 degrees.
Can I use a Metabo TS 254 or TS 216 in the United States?
Not directly. Both are 230-volt, 50Hz European machines. Running one in North America needs a step-up transformer or a dedicated 240-volt circuit and a plug change, and you lose local warranty support.
Is the Metabo HPT C10FCG2 a table saw?
No. The C10FCG2 is a 15-amp, 10-inch single-bevel compound miter saw weighing about 24 pounds. It crosscuts, it does not rip sheet goods, and listings that describe it as a jobsite table saw are wrong.
Is the C3610DRA a corded 12-inch saw?
No. The C3610DRA is a 36V MultiVolt cordless 10-inch sliding dual-bevel miter saw. The 15-amp corded 12-inch slider in the range is the C12RSH2S.
How much does the Metabo HPT C10RJS weigh?
Around 96 pounds with the fold-and-roll stand attached. It rolls easily on flat ground but is a two-person lift into a truck bed.
Does the C10RJS have a cast-iron table?
No. Like other jobsite saws it uses an aluminum table to keep weight down. Cast iron is found on stationary contractor and cabinet saws, which weigh two to four times as much.
Can I use a dado stack on the C10RJS?
Check the manual before you buy a stack. Jobsite saws often have short arbors and blade guards that are not dado-compatible, and the arbor length is the limiting factor rather than the motor.
Our verdict
For US buyers in 2026 the Metabo HPT C10RJS is the Metabo table saw, because it is the only one sold here. Its 15-amp motor, 35-inch rip capacity and rack-and-pinion fence make it a strong jobsite saw judged against other portables, provided you accept an aluminum top and jobsite-grade dust collection. In the UK and Europe, the 2,000-watt Metabo TS 254 is the better workshop machine and the smaller TS 216 is the one to carry. Whatever you do, do not buy a C10FCG2 or C3610DRA expecting a table saw, because both are miter saws.